dmesg

SUBMITTED BY: Guest

DATE: Jan. 21, 2013, 5:35 p.m.

FORMAT: Text only

SIZE: 29.8 kB

Raw Download

HITS: 1455

Report
  1. [ 0.377923] pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
  2. [ 0.378002] pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
  3. [ 0.378084] pci 0000:00:1d.3: reg 20 io port: [0xd480-0xd49f]
  4. [ 0.378168] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe937c00-0xfe937fff]
  5. [ 0.378258] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
  6. [ 0.378266] pci 0000:00:1d.7: PME# disabled
  7. [ 0.378481] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 0003)
  8. [ 0.378490] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
  9. [ 0.378596] pci 0000:00:1f.2: reg 10 io port: [0xd400-0xd407]
  10. [ 0.378609] pci 0000:00:1f.2: reg 14 io port: [0xd080-0xd083]
  11. [ 0.378621] pci 0000:00:1f.2: reg 18 io port: [0xd000-0xd007]
  12. [ 0.378633] pci 0000:00:1f.2: reg 1c io port: [0xcc80-0xcc83]
  13. [ 0.378645] pci 0000:00:1f.2: reg 20 io port: [0xcc00-0xcc0f]
  14. [ 0.378657] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe937800-0xfe937bff]
  15. [ 0.378717] pci 0000:00:1f.2: PME# supported from D3hot
  16. [ 0.378725] pci 0000:00:1f.2: PME# disabled
  17. [ 0.378960] pci 0000:01:00.0: reg 10 64bit mmio: [0xfeafc000-0xfeafffff]
  18. [ 0.379279] pci 0000:01:00.0: supports D1 D2
  19. [ 0.379798] pci 0000:00:1c.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
  20. [ 0.379895] pci 0000:02:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
  21. [ 0.379910] pci 0000:02:00.0: reg 18 io port: [0xec80-0xecff]
  22. [ 0.380054] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  23. [ 0.380064] pci 0000:02:00.0: PME# disabled
  24. [ 0.388136] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
  25. [ 0.388145] pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
  26. [ 0.388231] pci 0000:00:1e.0: transparent bridge
  27. [ 0.388272] pci_bus 0000:00: on NUMA node 0
  28. [ 0.388285] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  29. [ 0.388533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
  30. [ 0.388906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
  31. [ 0.398398] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
  32. [ 0.398612] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
  33. [ 0.398818] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
  34. [ 0.399027] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
  35. [ 0.399233] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  36. [ 0.399441] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  37. [ 0.399652] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
  38. [ 0.399861] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
  39. [ 0.400087] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
  40. [ 0.400105] vgaarb: loaded
  41. [ 0.400145] PCI: Using ACPI for IRQ routing
  42. [ 0.400413] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
  43. [ 0.400425] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  44. [ 0.400436] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
  45. [ 0.404026] Switching to clocksource tsc
  46. [ 0.406150] pnp: PnP ACPI init
  47. [ 0.406186] ACPI: bus type pnp registered
  48. [ 0.410594] pnp: PnP ACPI: found 13 devices
  49. [ 0.410600] ACPI: ACPI bus type pnp unregistered
  50. [ 0.410608] PnPBIOS: Disabled by ACPI PNP
  51. [ 0.410633] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
  52. [ 0.410652] system 00:08: ioport range 0x400-0x41f has been reserved
  53. [ 0.410659] system 00:08: ioport range 0x4d0-0x4d1 has been reserved
  54. [ 0.410666] system 00:08: ioport range 0x500-0x501 has been reserved
  55. [ 0.410673] system 00:08: ioport range 0x800-0x87f has been reserved
  56. [ 0.410680] system 00:08: ioport range 0x480-0x4bf has been reserved
  57. [ 0.410688] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
  58. [ 0.410695] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
  59. [ 0.410703] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
  60. [ 0.410717] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
  61. [ 0.410724] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
  62. [ 0.410737] system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
  63. [ 0.410749] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
  64. [ 0.410756] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
  65. [ 0.410764] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
  66. [ 0.410771] system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
  67. [ 0.410779] system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
  68. [ 0.445827] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
  69. [ 0.445835] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
  70. [ 0.445846] pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
  71. [ 0.445855] pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
  72. [ 0.445867] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
  73. [ 0.445874] pci 0000:00:1c.1: IO window: 0xe000-0xefff
  74. [ 0.445884] pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
  75. [ 0.445893] pci 0000:00:1c.1: PREFETCH window: 0x00000040200000-0x000000403fffff
  76. [ 0.445905] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
  77. [ 0.445909] pci 0000:00:1e.0: IO window: disabled
  78. [ 0.445918] pci 0000:00:1e.0: MEM window: disabled
  79. [ 0.445925] pci 0000:00:1e.0: PREFETCH window: disabled
  80. [ 0.445949] pci 0000:00:1c.0: enabling device (0106 -> 0107)
  81. [ 0.445969] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  82. [ 0.445979] pci 0000:00:1c.0: setting latency timer to 64
  83. [ 0.445998] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
  84. [ 0.446006] pci 0000:00:1c.1: setting latency timer to 64
  85. [ 0.446019] pci 0000:00:1e.0: setting latency timer to 64
  86. [ 0.446028] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
  87. [ 0.446035] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
  88. [ 0.446041] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
  89. [ 0.446047] pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
  90. [ 0.446054] pci_bus 0000:01: resource 2 pref mem [0x40000000-0x401fffff]
  91. [ 0.446060] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
  92. [ 0.446066] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
  93. [ 0.446073] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
  94. [ 0.446079] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
  95. [ 0.446085] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
  96. [ 0.446153] NET: Registered protocol family 2
  97. [ 0.446348] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  98. [ 0.447013] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  99. [ 0.448064] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  100. [ 0.448536] TCP: Hash tables configured (established 131072 bind 65536)
  101. [ 0.448544] TCP reno registered
  102. [ 0.448766] NET: Registered protocol family 1
  103. [ 0.448826] pci 0000:00:02.0: Boot video device
  104. [ 0.448871] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  105. [ 0.448897] pci 0000:00:1d.0: PCI INT A disabled
  106. [ 0.448912] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  107. [ 0.448935] pci 0000:00:1d.1: PCI INT B disabled
  108. [ 0.448950] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  109. [ 0.448973] pci 0000:00:1d.2: PCI INT C disabled
  110. [ 0.448986] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  111. [ 0.449009] pci 0000:00:1d.3: PCI INT D disabled
  112. [ 0.449027] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  113. [ 0.449071] pci 0000:00:1d.7: PCI INT A disabled
  114. [ 0.449187] Unpacking initramfs...
  115. [ 0.865723] Freeing initrd memory: 8402k freed
  116. [ 0.874535] audit: initializing netlink socket (disabled)
  117. [ 0.874560] type=2000 audit(1358764165.871:1): initialized
  118. [ 0.880672] HugeTLB registered 4 MB page size, pre-allocated 0 pages
  119. [ 0.883857] VFS: Disk quotas dquot_6.5.2
  120. [ 0.883983] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  121. [ 0.884141] msgmni has been set to 1760
  122. [ 0.884553] alg: No test for stdrng (krng)
  123. [ 0.884680] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  124. [ 0.884687] io scheduler noop registered
  125. [ 0.884692] io scheduler anticipatory registered
  126. [ 0.884696] io scheduler deadline registered
  127. [ 0.884781] io scheduler cfq registered (default)
  128. [ 0.884998] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
  129. [ 0.885014] pcieport 0000:00:1c.0: setting latency timer to 64
  130. [ 0.885238] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
  131. [ 0.885253] pcieport 0000:00:1c.1: setting latency timer to 64
  132. [ 0.885582] isapnp: Scanning for PnP cards...
  133. [ 1.239460] isapnp: No Plug & Play device found
  134. [ 1.242790] Linux agpgart interface v0.103
  135. [ 1.242936] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
  136. [ 1.243136] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
  137. [ 1.245810] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
  138. [ 1.245945] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  139. [ 1.246677] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  140. [ 1.250168] i8042.c: Detected active multiplexing controller, rev 1.1.
  141. [ 1.253158] serio: i8042 KBD port at 0x60,0x64 irq 1
  142. [ 1.253174] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  143. [ 1.253184] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  144. [ 1.253194] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  145. [ 1.253204] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  146. [ 1.253357] mice: PS/2 mouse device common for all mice
  147. [ 1.253473] rtc_cmos 00:03: RTC can wake from S4
  148. [ 1.253560] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
  149. [ 1.253603] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
  150. [ 1.253630] cpuidle: using governor ladder
  151. [ 1.253634] cpuidle: using governor menu
  152. [ 1.253644] No iBFT detected.
  153. [ 1.254492] TCP cubic registered
  154. [ 1.254820] NET: Registered protocol family 10
  155. [ 1.256640] Mobile IPv6
  156. [ 1.256647] NET: Registered protocol family 17
  157. [ 1.256679] Using IPI No-Shortcut mode
  158. [ 1.256850] PM: Resume from disk failed.
  159. [ 1.256884] registered taskstats version 1
  160. [ 1.257573] rtc_cmos 00:03: setting system clock to 2013-01-21 10:29:26 UTC (1358764166)
  161. [ 1.257683] Initalizing network drop monitor service
  162. [ 1.257728] Freeing unused kernel memory: 376k freed
  163. [ 1.258039] Write protecting the kernel text: 2452k
  164. [ 1.258071] Write protecting the kernel read-only data: 884k
  165. [ 1.290411] udev[56]: starting version 164
  166. [ 1.291146] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
  167. [ 1.557345] SCSI subsystem initialized
  168. [ 1.578178] atl1c 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
  169. [ 1.578204] atl1c 0000:02:00.0: setting latency timer to 64
  170. [ 1.603630] usbcore: registered new interface driver usbfs
  171. [ 1.603695] usbcore: registered new interface driver hub
  172. [ 1.604112] usbcore: registered new device driver usb
  173. [ 1.617044] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  174. [ 1.617119] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  175. [ 1.617160] ehci_hcd 0000:00:1d.7: setting latency timer to 64
  176. [ 1.617170] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  177. [ 1.617244] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  178. [ 1.617302] ehci_hcd 0000:00:1d.7: using broken periodic workaround
  179. [ 1.617324] ehci_hcd 0000:00:1d.7: debug port 1
  180. [ 1.621209] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
  181. [ 1.621248] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe937c00
  182. [ 1.664203] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
  183. [ 1.664287] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  184. [ 1.664297] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  185. [ 1.664306] usb usb1: Product: EHCI Host Controller
  186. [ 1.664313] usb usb1: Manufacturer: Linux 2.6.32 ehci_hcd
  187. [ 1.664320] usb usb1: SerialNumber: 0000:00:1d.7
  188. [ 1.664737] usb usb1: configuration #1 chosen from 1 choice
  189. [ 1.664949] hub 1-0:1.0: USB hub found
  190. [ 1.664976] hub 1-0:1.0: 8 ports detected
  191. [ 1.691647] libata version 3.00 loaded.
  192. [ 1.697278] thermal LNXTHERM:01: registered as thermal_zone0
  193. [ 1.697304] ACPI: Thermal Zone [THRM] (29 C)
  194. [ 1.708595] atl1c 0000:02:00.0: version 1.0.0.2-NAPI
  195. [ 1.726454] uhci_hcd: USB Universal Host Controller Interface driver
  196. [ 1.726565] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
  197. [ 1.726587] uhci_hcd 0000:00:1d.0: setting latency timer to 64
  198. [ 1.726597] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  199. [ 1.726632] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  200. [ 1.726684] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
  201. [ 1.726796] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  202. [ 1.726805] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  203. [ 1.726813] usb usb2: Product: UHCI Host Controller
  204. [ 1.726820] usb usb2: Manufacturer: Linux 2.6.32 uhci_hcd
  205. [ 1.726827] usb usb2: SerialNumber: 0000:00:1d.0
  206. [ 1.727056] usb usb2: configuration #1 chosen from 1 choice
  207. [ 1.727157] hub 2-0:1.0: USB hub found
  208. [ 1.727178] hub 2-0:1.0: 2 ports detected
  209. [ 1.727312] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  210. [ 1.727331] uhci_hcd 0000:00:1d.1: setting latency timer to 64
  211. [ 1.727340] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  212. [ 1.727364] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  213. [ 1.727434] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
  214. [ 1.727542] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  215. [ 1.727551] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  216. [ 1.727560] usb usb3: Product: UHCI Host Controller
  217. [ 1.727567] usb usb3: Manufacturer: Linux 2.6.32 uhci_hcd
  218. [ 1.727574] usb usb3: SerialNumber: 0000:00:1d.1
  219. [ 1.727773] usb usb3: configuration #1 chosen from 1 choice
  220. [ 1.727871] hub 3-0:1.0: USB hub found
  221. [ 1.727891] hub 3-0:1.0: 2 ports detected
  222. [ 1.728056] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
  223. [ 1.728077] uhci_hcd 0000:00:1d.2: setting latency timer to 64
  224. [ 1.728086] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  225. [ 1.728112] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  226. [ 1.728175] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
  227. [ 1.728274] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  228. [ 1.728283] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  229. [ 1.728291] usb usb4: Product: UHCI Host Controller
  230. [ 1.728298] usb usb4: Manufacturer: Linux 2.6.32 uhci_hcd
  231. [ 1.728305] usb usb4: SerialNumber: 0000:00:1d.2
  232. [ 1.728496] usb usb4: configuration #1 chosen from 1 choice
  233. [ 1.728595] hub 4-0:1.0: USB hub found
  234. [ 1.728615] hub 4-0:1.0: 2 ports detected
  235. [ 1.728741] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
  236. [ 1.728760] uhci_hcd 0000:00:1d.3: setting latency timer to 64
  237. [ 1.728769] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  238. [ 1.728792] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  239. [ 1.728851] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
  240. [ 1.728946] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
  241. [ 1.728956] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  242. [ 1.728964] usb usb5: Product: UHCI Host Controller
  243. [ 1.728970] usb usb5: Manufacturer: Linux 2.6.32 uhci_hcd
  244. [ 1.728977] usb usb5: SerialNumber: 0000:00:1d.3
  245. [ 1.729174] usb usb5: configuration #1 chosen from 1 choice
  246. [ 1.729277] hub 5-0:1.0: USB hub found
  247. [ 1.729312] hub 5-0:1.0: 2 ports detected
  248. [ 1.756522] ahci 0000:00:1f.2: version 3.0
  249. [ 1.756561] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  250. [ 1.756663] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
  251. [ 1.756807] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
  252. [ 1.756819] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
  253. [ 1.756832] ahci 0000:00:1f.2: setting latency timer to 64
  254. [ 1.759300] scsi0 : ahci
  255. [ 1.760256] scsi1 : ahci
  256. [ 1.760508] scsi2 : ahci
  257. [ 1.765189] scsi3 : ahci
  258. [ 1.765379] ata1: SATA max UDMA/133 abar m1024@0xfe937800 port 0xfe937900 irq 26
  259. [ 1.765388] ata2: DUMMY
  260. [ 1.765396] ata3: SATA max UDMA/133 abar m1024@0xfe937800 port 0xfe937a00 irq 26
  261. [ 1.765403] ata4: DUMMY
  262. [ 1.775960] b43-pci-bridge 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  263. [ 1.775985] b43-pci-bridge 0000:01:00.0: setting latency timer to 64
  264. [ 1.836167] ssb: Sonics Silicon Backplane found on PCI device 0000:01:00.0
  265. [ 1.976047] usb 1-4: new high speed USB device using ehci_hcd and address 2
  266. [ 2.084050] ata3: SATA link down (SStatus 0 SControl 300)
  267. [ 2.084058] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  268. [ 2.085587] ata1.00: ATA-8: FUJITSU MJA2250BH G2, 8919, max UDMA/100
  269. [ 2.085594] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
  270. [ 2.087098] ata1.00: configured for UDMA/100
  271. [ 2.100262] scsi 0:0:0:0: Direct-Access ATA FUJITSU MJA2250B 8919 PQ: 0 ANSI: 5
  272. [ 2.117818] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
  273. [ 2.118043] sd 0:0:0:0: [sda] Write Protect is off
  274. [ 2.118053] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  275. [ 2.118149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  276. [ 2.118690] sda: sda1 sda2 sda3 sda4 < sda5 sda6
  277. [ 2.197213] usb 1-4: New USB device found, idVendor=174f, idProduct=110b
  278. [ 2.197220] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  279. [ 2.197226] usb 1-4: Product: HP Webcam-50
  280. [ 2.197231] usb 1-4: Manufacturer: D-MAX
  281. [ 2.197235] usb 1-4: SerialNumber: 00
  282. [ 2.197419] usb 1-4: configuration #1 chosen from 1 choice
  283. [ 2.198650] sda7 >
  284. [ 2.200278] sd 0:0:0:0: [sda] Attached SCSI disk
  285. [ 2.624038] usb 5-2: new full speed USB device using uhci_hcd and address 2
  286. [ 2.799756] usb 5-2: New USB device found, idVendor=03f0, idProduct=2a1d
  287. [ 2.799765] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  288. [ 2.799771] usb 5-2: Product: HP Bluetooth Module
  289. [ 2.799776] usb 5-2: Manufacturer: Broadcom Corp
  290. [ 2.799780] usb 5-2: SerialNumber: 00265EC072E1
  291. [ 2.799969] usb 5-2: configuration #1 chosen from 1 choice
  292. [ 2.869033] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
  293. [ 2.871565] SGI XFS Quota Management subsystem
  294. [ 2.893479] XFS mounting filesystem sda7
  295. [ 3.037560] Starting XFS recovery on filesystem: sda7 (logdev: internal)
  296. [ 3.718245] Ending XFS recovery on filesystem: sda7 (logdev: internal)
  297. [ 5.664697] udev[332]: starting version 164
  298. [ 6.268606] ACPI: SSDT 3f7be340 0023C (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
  299. [ 6.269810] ACPI: SSDT 3f7be610 005D0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
  300. [ 6.284086] Monitor-Mwait will be used to enter C-1 state
  301. [ 6.284187] Monitor-Mwait will be used to enter C-2 state
  302. [ 6.284791] Monitor-Mwait will be used to enter C-3 state
  303. [ 6.284822] Marking TSC unstable due to TSC halts in idle
  304. [ 6.285103] processor LNXCPU:00: registered as cooling_device0
  305. [ 6.286191] ACPI: SSDT 3f7be270 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
  306. [ 6.287035] ACPI: SSDT 3f7be580 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
  307. [ 6.288172] Switching to clocksource hpet
  308. [ 6.291127] processor LNXCPU:01: registered as cooling_device1
  309. [ 6.334942] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0D:00/input/input1
  310. [ 6.338325] ACPI: Lid Switch [LID]
  311. [ 6.338992] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
  312. [ 6.339012] ACPI: Sleep Button [SLPB]
  313. [ 6.340229] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
  314. [ 6.340250] ACPI: Power Button [PWRB]
  315. [ 6.340665] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
  316. [ 6.340682] ACPI: Power Button [PWRF]
  317. [ 6.434411] ACPI: AC Adapter [AC0] (on-line)
  318. [ 6.437201] ACPI: Battery Slot [BAT1] (battery absent)
  319. [ 6.449151] input: PC Speaker as /devices/platform/pcspkr/input/input5
  320. [ 6.865648] ACPI: WMI: Mapper loaded
  321. [ 7.017898] Bluetooth: Core ver 2.15
  322. [ 7.018037] NET: Registered protocol family 31
  323. [ 7.018043] Bluetooth: HCI device and connection manager initialized
  324. [ 7.018060] Bluetooth: HCI socket layer initialized
  325. [ 7.276167] cfg80211: Using static regulatory domain info
  326. [ 7.276175] cfg80211: Regulatory domain: US
  327. [ 7.276181] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  328. [ 7.276191] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  329. [ 7.276201] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  330. [ 7.276210] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  331. [ 7.276219] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  332. [ 7.276228] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  333. [ 7.276238] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  334. [ 7.276982] cfg80211: Calling CRDA for country: US
  335. [ 7.285338] intel_rng: FWH not detected
  336. [ 7.286839] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
  337. [ 7.286968] ACPI: Video Device [IGD] (multi-head: yes rom: no post: no)
  338. [ 7.294963] Bluetooth: Generic Bluetooth USB driver ver 0.6
  339. [ 7.295304] usbcore: registered new interface driver btusb
  340. [ 7.566648] Linux video capture interface: v2.00
  341. [ 7.578100] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04711/0xa00000/0x20000
  342. [ 7.614822] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7
  343. [ 7.998407] uvcvideo: Found UVC 1.00 device HP Webcam-50 (174f:110b)
  344. [ 8.022067] input: HP Webcam-50 as /devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4:1.0/input/input8
  345. [ 8.022241] usbcore: registered new interface driver uvcvideo
  346. [ 8.022252] USB Video Class driver (v0.1.0)
  347. [ 8.270517] [drm] Initialized drm 1.1.0 20060810
  348. [ 8.314183] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  349. [ 8.314297] HDA Intel 0000:00:1b.0: setting latency timer to 64
  350. [ 8.423761] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
  351. [ 9.059448] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
  352. [ 9.068890] input: HDA Intel Mic at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
  353. [ 9.069173] input: HDA Intel HP Out at Ext Right Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
  354. [ 9.384689] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
  355. [ 9.384702] i915 0000:00:02.0: setting latency timer to 64
  356. [ 9.390746] phy0: Selected rate control algorithm 'minstrel'
  357. [ 9.392881] Registered led device: b43-phy0::tx
  358. [ 9.392937] Registered led device: b43-phy0::rx
  359. [ 9.392989] Registered led device: b43-phy0::radio
  360. [ 9.393143] Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
  361. [ 9.395535] [drm] set up 7M of stolen space
  362. [ 9.500302] [drm] initialized overlay support
  363. [ 10.209555] Console: switching to colour frame buffer device 128x37
  364. [ 10.216554] fb0: inteldrmfb frame buffer device
  365. [ 10.216558] registered panic notifier
  366. [ 10.216576] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
  367. [ 10.751585] Adding 1060248k swap on /dev/sda6. Priority:-1 extents:1 across:1060248k
  368. [ 11.250001] loop: module loaded
  369. [ 15.709716] atl1c 0000:02:00.0: irq 27 for MSI/MSI-X
  370. [ 15.710395] ADDRCONF(NETDEV_UP): eth0: link is not ready
  371. [ 16.488227] b43 ssb0:0: firmware: requesting b43/ucode15.fw
  372. [ 16.540306] b43 ssb0:0: firmware: requesting b43/lp0initvals15.fw
  373. [ 16.546548] b43 ssb0:0: firmware: requesting b43/lp0bsinitvals15.fw
  374. [ 16.704218] b43-phy0: Loading firmware version 478.104 (2008-07-01 00:50:23)
  375. [ 22.213064] ADDRCONF(NETDEV_UP): wlan0: link is not ready
  376. [ 24.272702] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 1)
  377. [ 24.472158] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 2)
  378. [ 24.672171] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 3)
  379. [ 24.674536] wlan0: direct probe responded
  380. [ 24.674552] wlan0: authenticate with AP 00:24:d2:1b:5f:81 (try 1)
  381. [ 24.676271] wlan0: authenticated
  382. [ 24.676330] wlan0: associate with AP 00:24:d2:1b:5f:81 (try 1)
  383. [ 24.678633] wlan0: RX AssocResp from 00:24:d2:1b:5f:81 (capab=0x411 status=0 aid=1)
  384. [ 24.678647] wlan0: associated
  385. [ 24.680564] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  386. [ 34.720119] wlan0: no IPv6 routers present
  387. [ 37.899486] fuse init (API version 7.13)
  388. [ 39.760336] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
  389. [ 41.719987] apm: BIOS not found.
  390. [ 42.200744] Bluetooth: L2CAP ver 2.14
  391. [ 42.200752] Bluetooth: L2CAP socket layer initialized
  392. [ 42.231158] Bluetooth: RFCOMM TTY layer initialized
  393. [ 42.231168] Bluetooth: RFCOMM socket layer initialized
  394. [ 42.231175] Bluetooth: RFCOMM ver 1.11
  395. [ 42.315666] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  396. [ 42.315674] Bluetooth: BNEP filters: protocol multicast
  397. [ 42.382807] Bridge firewalling registered
  398. [ 42.432317] Bluetooth: SCO (Voice Link) ver 0.6
  399. [ 42.432325] Bluetooth: SCO socket layer initialized
  400. [ 44.812387] lp: driver loaded but no devices found
  401. [ 44.947851] ppdev: user-space parallel port driver
  402. [ 55.934027] CPU0 attaching NULL sched-domain.
  403. [ 55.934041] CPU1 attaching NULL sched-domain.
  404. [ 55.956136] CPU0 attaching sched-domain:
  405. [ 55.956147] domain 0: span 0-1 level SIBLING
  406. [ 55.956156] groups: group c1c0370c cpus 0 (cpu_power = 589) group c1e0370c cpus 1 (cpu_power = 589)
  407. [ 55.956177] domain 1: span 0-1 level MC
  408. [ 55.956184] groups: group c1c03778 cpus 0-1 (cpu_power = 1178)
  409. [ 55.956199] CPU1 attaching sched-domain:
  410. [ 55.956207] domain 0: span 0-1 level SIBLING
  411. [ 55.956214] groups: group c1e0370c cpus 1 (cpu_power = 589) group c1c0370c cpus 0 (cpu_power = 589)
  412. [ 55.956233] domain 1: span 0-1 level MC
  413. [ 55.956240] groups: group c1c03778 cpus 0-1 (cpu_power = 1178)
  414. [ 2608.504031] No probe response from AP 00:24:d2:1b:5f:81 after 500ms, disconnecting.
  415. [ 2609.508482] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 1)
  416. [ 2609.510666] wlan0: direct probe responded
  417. [ 2609.510677] wlan0: authenticate with AP 00:24:d2:1b:5f:81 (try 1)
  418. [ 2609.512493] wlan0: authenticated
  419. [ 2609.512551] wlan0: associate with AP 00:24:d2:1b:5f:81 (try 1)
  420. [ 2609.514801] wlan0: RX AssocResp from 00:24:d2:1b:5f:81 (capab=0x411 status=0 aid=1)
  421. [ 2609.514811] wlan0: associated
  422. [13249.504031] No probe response from AP 00:24:d2:1b:5f:81 after 500ms, disconnecting.
  423. [13250.540482] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 1)
  424. [13250.740033] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 2)
  425. [13250.743361] wlan0: direct probe responded
  426. [13250.743370] wlan0: authenticate with AP 00:24:d2:1b:5f:81 (try 1)
  427. [13250.745155] wlan0: authenticated
  428. [13250.745206] wlan0: associate with AP 00:24:d2:1b:5f:81 (try 1)
  429. [13250.747466] wlan0: RX AssocResp from 00:24:d2:1b:5f:81 (capab=0x411 status=0 aid=1)
  430. [13250.747475] wlan0: associated
  431. [16996.500032] No probe response from AP 00:24:d2:1b:5f:81 after 500ms, disconnecting.
  432. [16997.512484] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 1)
  433. [16997.516263] wlan0: direct probe responded
  434. [16997.516275] wlan0: authenticate with AP 00:24:d2:1b:5f:81 (try 1)
  435. [16997.523040] wlan0: authenticated
  436. [16997.523090] wlan0: associate with AP 00:24:d2:1b:5f:81 (try 1)
  437. [16997.529363] wlan0: RX AssocResp from 00:24:d2:1b:5f:81 (capab=0x411 status=0 aid=1)
  438. [16997.529373] wlan0: associated
  439. [26616.489032] No probe response from AP 00:24:d2:1b:5f:81 after 500ms, disconnecting.
  440. [26617.629715] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 1)
  441. [26617.829038] wlan0: direct probe to AP 00:24:d2:1b:5f:81 (try 2)
  442. [26617.831218] wlan0: direct probe responded
  443. [26617.831227] wlan0: authenticate with AP 00:24:d2:1b:5f:81 (try 1)
  444. [26617.832932] wlan0: authenticated
  445. [26617.832982] wlan0: associate with AP 00:24:d2:1b:5f:81 (try 1)
  446. [26617.835425] wlan0: RX AssocResp from 00:24:d2:1b:5f:81 (capab=0x411 status=0 aid=1)
  447. [26617.835435] wlan0: associated
comments powered by Disqus